EFLO SEP Installation

EFLO SEP Installation

EFLO SEP Benefits

Inlet Screen

Adjustable Oil Skimming Weirs

Stainless Steel or Epoxy Coated Mild Steel Fabrication

Enhanced Separation using Tilted Plate Technology

Concrete Tank Option

Flat or Hopper Bottom Tanks

Above or Below Ground Installation

EFLO SEP oily Water Interceptors are used for the separation of and free floating oils for waste water streams.

Applications are industrial sites where rain or wash down water can wash spilt oils into storm drains.

Also, food processing factories.

Other uses are in pre-treatment to further water treatment processes, where oil contamination will cause process problems.

EFLO SEP is a key process component in industrial water re-use systems.

Enhanced oil removal to better than 50 mg/l can be achieved by incorporating and utilizing plastic oil attracting media.

All Eflo SEP units are available as package, steel fabricated systems.

Larger systems can be built using concrete tanks with pre-fabricated internal components.


EFLO SEP Diagram

EFLO SEP Plant Dimensions

Model Flow m3/d Unit size of Process Tank L x W x D m No. of Process Tanks in Parallel
EFLO SEP 35 50 2.0 x 0.7 x 1.5 1 single stream
EFLO SEP 70 100 2.5 x 0.7 x 1.9 1 single stream
EFLO SEP 130 190 2.7 x 0.7 x 2.2 1 stream parallel
EFLO SEP 270 380 2.7 x 1.3 x 2.2 1 stream parallel
EFLO SEP 400 580 3.2 x 1.3 x 2.6 1 stream parallel
EFLO SEP 530 770 4.2 x 1.3 x 3.1 1 stream parallel
EFLO SEP 800 1150 4.5 x 1.3 x 3.3 1 stream parallel
EFLO SEP 1200 1700 4.5 x 1.9 x 3.3 1 stream parallel
EFLO SEP 1600 2300 4.5 x 2.5 x 3.3 1 stream parallel

The Eflo SEP single stage interceptor is designed to separate 99.9% of 50 micron free oil droplets of an SG of 0.86 or below from water with an SG of 1.0 or above.

Typical oil in effluent quality is 50 mg/l.

Options for second stage oil attracting media can improve this quality further to around 20 mg/l

Industrial Applications: